您的位置：首页 > 产品中心 > > 测试附件 > 电流探头 > 法国CA电流测量探头
漏电流钳
型号：C173
品牌：法国CA/CA
QQ咨询
微信二维码

产品功能介绍


产品功能介绍


产品概述

1200A AC 漏电流测量。产品应用：漏电流测量(电缆、变压器、旋转电机和中压发电)。


产品资料手册


产品资料手册

名称 版本 发布时间 下载
C173-用户手册 -- -- 点击下载


订货信息


订货信息

型号 描述 数量

P01120309


P01197201

P01100120



AC current clamp model C173 with operating manual


Accessory：AN1 artificial neutral box (see capter 12) 

Bag n°11

--


产品规格


产品规格

型号 C173
Current calibres
0.001 A AC…1.2 A AC
0.01 A AC…12 A AC
0.1 A AC…120 A AC
1 A AC…1200 A AC
Output signal
1 VAC/A AC (1 V for 1 A)
100 mVAC/A AC (1 V for 10 A)
10 mVAC/A AC (1 V for 100 A)
1 mVAC/A AC (1 V for 1000 A)
Bandwidth
10Hz…3kHz
Crest factor

1 A calibre：≤ 3 for I ≤ 3 A peak (1 Arms)


10 A calibre：≤ 3 for I ≤ 30 A peak (10 Arms)

100 A calibre：≤ 3 for I ≤ 300 A peak (100 Arms)


1000 A calibre：≤ 3 for I ≤ 1700 A peak (500 Arms)



Maximum currents
1000 A continuous for a frequency ≤ 500Hz
(limitation proportional to the inverse of 1/2 of
frequency beyond)
Load impedance
≥ 10 MΩ and ≤ 47 pF
Output impedance

1 A calibre：10 kΩ ± 10 %

10 A calibre：1 kΩ ± 10 %

100 A calibre：100 Ω ± 10 %

1000 A calibre：100 Ω ± 10 %

Operating voltage
600 Vrms
Common mode voltage
600 V category III and pollution degree 2
Influence of adjacent conductor
≤ 1 mA/A at 50Hz
Influence of conductor position in jaws
≤ 0.3 % of output signal for frequencies ≤ 400 Hz
Influence of crest factor
≤ 0.5 % for crest factor limited to 3
Influence of DC current superimposed on rated current
≤ 10 % at 1000 A for a DC current of 10 A
Operating temperature
-10°C…+50 °C
Storage temperature
-40°C…+70 °C
Influence of temperature
≤ 0.15 % of output signal per 10 °K from
-10 °C…+40 °C
≤ 0.2 % of output signal per 10 °K from
+40 °C…+50 °C
Relative humidity for operation
0…85 % RH with a linear decrease above 35°C
Influence of relative humidity
< 0.1 % of output signal from 10 % to 85 % RH
Operating altitude
0 to 2,000 m
Max. jaw opening
53 mm Patented progressive opening system
Clamping capacity
Cable: Ø max 52 mm
Busbar: 1 busbar of 50 x 5 mm or 4 busbars
of 30 x 5 mm
Casing protection rating
IP40 (IEC 529)
Drop test
1 m (IEC 68-2-32)
Shock resistance
100 g (IEC 68-2-27)
Vibration resistance
5/15 Hz 1.5 mm
15/25 Hz 1 mm
25/55 Hz 0.25 mm
(IEC 68-2-6)
Self-extinguishing capability
UL94 V0
Dimensions
216 x 111 x 45 mm
Weight
550 g
Colours
Dark grey case with red jaws
Output
1.5 m two-wire lead with double or reinforced
insulation terminated by 2 elbowed male
safety plugs (4 mm)